Wood Group needed a high class look. They were moving into a new building that have bare concrete floor. They are in the aerospace industry, so a world class look is necessary. As you can see by the pictures, they got what they wanted. A smooth High gloss, Wow their customer floor.

Here is what we did for a scope of work to get them where they needed to be:

We diamond ground the floor to prepare the concrete for the epoxy primer adhesion

We filled in all small voids with an epoxy/cabosil paste.

We primer the floor with 100% solids epoxy primer at a nominal 6 mils dry film thickness.

We screen the floor to remove any dirt or particulate.

A second body coat of epoxy was applied at a nominal 12 mils dft.

The floor was screened again to remove any particulate.

A high gloss urethane was applied at the chemical resistant top coat with a 60 mesh oxide for slip resistance.

We use a urethane ontop because urethane maintains its color, is chemical resistant, and is more durable than an epoxy coating.

If you have a project that you need advice on, give us a call 413-998-3174